All FLAME MONITOR

The Fireye® FLAME-MONITOR™ System is a microprocessor based burner management control system designed to provide the proper burner sequencing, ignition and flame monitoring pro-tection on automatically ignited oil, gas, and combination fuel burners.

FLAME MONITOR Subcategories

Chassis
Chassis

Display
Display

E300 EXPANSION MODULES
E300 EXPANSION MODULES

The Fireye E300 Expansion Module provides increased interlock supervision capability of the Flame-Monitor® System. The Expansion Module connects to any EB700 Flame-Monitor Chassis by means of a ribbon cable. (P/N E350-3, E350-6). By wiring an […]

EP Programmers
EP Programmers

The Fireye EP Programmer Modules are used with the Flame-Monitor Burner Management Control System (P/N’s E110 and E100). They provide start-up programming, safe start check, and flame monitoring supervision. They insure open damper high fire p […]

EPD Programmers
EPD Programmers

All EPD programmers (e.g., EPD160) are OBSOLETE. Consult ITS.

FLAME AMPLIFIERS
FLAME AMPLIFIERS

The FIREYE E1R1, EUV1, ERT1 and EUVS4 Amplifier Modules are used in conjunction with the FIREYE FLAME-MONITOR system. These modules provide flame scanning using any of the FIREYE AutoCheck infrared scanners, standard ultraviolet scanners, flam […]

FLAME-MONITOR ACCESSORIES
FLAME-MONITOR ACCESSORIES

Remote Display Housing Blank Display Module Multi-Port Cable Connector and Terminal Strip Remote Reset Cables Remote Display Cables

PROGRAMMERS AND FLAME AMPLIFIERS FOR USE WITH INTEGRATED FLAME SCANNERS
PROGRAMMERS AND FLAME AMPLIFIERS FOR USE WITH INTEGRATED FLAME SCANNERS

The Fireye Flame-Monitor programmers, type EP178 and EP378, with the EDC1 or EDC2 amplifiers, are specially designed to operate as a primary burner control use specific models of the InSight and Phoenix integrated scanners as the flame detecto […]

FLAME MONITOR Components

Manufacturers

LME7 Flame Safeguard
LME7 Flame Safeguard

Siemens LME7 Flame safeguard sets a new standard for flexible, cost effective burner supervision. Ease of installation, programming and commissioning are incorporated into a reliable, field proven control. The LME7 offers flexibility not found […]

Flame-Monitor E110 Flame Safeguard
Flame-Monitor E110 Flame Safeguard

Control, consisting of EB700, 48‐1836, EC600. 120 VAC. Display ordered separately. UL, FM, UL/c Approved. E110

Flame-Monitor E120 Flame Safeguard
Flame-Monitor E120 Flame Safeguard

Same as E110 except 220 VAC, consisting of EB701, 48‐1836, EC600. 220 VAC. FM Approval only. E120

Flame-Monitor E210 Flame Safeguard
Flame-Monitor E210 Flame Safeguard

OBSOLETE Consult ITS

Flame-Monitor E211 Flame Safeguard
Flame-Monitor E211 Flame Safeguard

OBSOLETE consult ITS

Keypad/Display Module ED510
Keypad/Display Module ED510

2 line x 16 character backlit LCD display with keypad. ED510

EP113 Programmers
EP113 Programmers

All EP113 Programmers (e.g. EP113D) are OBSOLETE. Consult ITS

EP100F EP Programmer
EP100F EP Programmer

Programmer. Selectable purge, selectable TFI, non‐recycle, EP100F French language.

EP100S EP Programmer
EP100S EP Programmer

Programmer. Selectable purge, selectable TFI, non‐recycle, Spanish language. EP100S

EP160 EP Programmer
EP160 EP Programmer

Programmer. Selectable purge (30 sec min.), 10 and 15 sec. TFI, non‐recycle. EP160

EP161 EP Programmer
EP161 EP Programmer

Programmer. Selectable purge (30 sec min.), 10 and 30 sec. TFI, non‐recycle. EP161

EP163 EP Programmer
EP163 EP Programmer

Programmer. Selectable purge (30 sec min.), selectable TFI via ED510 display, non‐recycle.

EP165 EP Programmer
EP165 EP Programmer

Programmer. Selectable purge (30 sec min.), pilot stabilization, non‐recycle, 10 and 10 sec TFI.

EP166 EP Programmer
EP166 EP Programmer

Programmer. Selectable purge (30 sec min.), pilot stabilization, non‐recycle, 10 and 15 sec TFI programmer. EP166

EP170 EP Programmer
EP170 EP Programmer

Programmer. Selectable purge (30 sec min.), 5 and 10 sec. TFI, non‐recycle, early spark termination.