Home » Components »
Fireye
»
Burner Controls
»
FLAME MONITOR
» FLAME AMPLIFIERS
The FIREYE E1R1, EUV1, ERT1 and EUVS4 Amplifier Modules are used in conjunction with the
FIREYE FLAME-MONITOR system. These modules provide flame scanning using any of the FIREYE AutoCheck infrared scanners, standard ultraviolet scanners, flame rod, and ultraviolet selfcheck scanners. After scanner selection the proper amplifier module must be inserted in the FlameMonitor chassis.
Fireye E1R1 Flame Amplifier
Infrared autocheck amplifier, use with 48PT2. E1R1
Fireye E1R2 Flame Amplifier
Infrared autocheck amplifier, use with 48PT2. Special application only, consult ITS. E1R2
Fireye E1R3 Flame Amplifier
Infrared autocheck amplifier, use with 48PT2. Solid fuels only. E1R3
Fireye ERT1 Flame Amplifier
Flame rectification amplifier, use with 45CM or 69ND. ERT1
Fireye EUV1 Flame Amplifier
Ultraviolet amplifier, use with UV1, UV2, UV8, UV90,or 45UV3. EUV1
Fireye EUVS4 Flame Amplifier
Ultraviolet self check amplifier. Use with 45UV5‐1005, ‐1007, ‐1008, ‐1009, or 55UV5‐1007, ‐1009. EUVS4
