All PROGRAMMERS AND FLAME AMPLIFIERS FOR USE WITH INTEGRATED FLAME SCANNERS

The Fireye Flame-Monitor programmers, type EP178 and EP378, with the EDC1 or EDC2 amplifiers, are specially designed to operate as a primary burner control use specific models of the InSight and Phoenix integrated scanners as the flame detector. Specific models of the InSight scanners are95IRS2-1, 95IRS2-2, 95UVS2-1, 95UVS2-2, 95UVS2-3, 95DSS2-1. Use of cable assembly 59-497-020-WR, 59-497-020C-WR, 59-497-020R-WR, or 59-497-020RC-WR is necessary to makethe InSight scanner compatible with the Flame-Monitor system. Specific models of the Phoenix scanners are standard models; 85UVF4-1QDWR, 85IRF4-1QDWR and fiber optic models; 85UVF4-2QDWR, 85IRF4-2QDWR. Refer to bulletins E-1101, EAMP1, CU-95 and CU-114

Manufacturers

Fireye EP178 Programmer
Fireye EP178 Programmer

Programmer. Keypad adjustable purge time, PTFI time, MTFI time, post purge time, early spark termination, pilot proving period, and indefinite hold on low fire start. For use with EDC1 and EDC2 amplifiers. EP178

Fireye EP378 Programmer
Fireye EP378 Programmer

Programmer. Keypad adjustable purge time, PTFI time, MTFI time, post purge time, early spark termination, pilot proving period, and indefinite hold on low fire start. No modulation. For use with EDC1 and EDC2 amplifiers. EP378

Fireye EDC1 Flame Amplifier
Fireye EDC1 Flame Amplifier

Amplifier, for use with EP178 / EP378 and one or two 85UVF4‐ 1QDWR, 85IRF4‐1QDWR, or InSight flame scanners (with 59‐497 ‐020WR cable). EDC1

Fireye EDC2 Flame Amplifier
Fireye EDC2 Flame Amplifier

Amplifier, for use with EP178 / EP378 and two 85UVF4‐ 1QDWR, 85IRF4‐1QDWR, or InSight flame scanners (with 59‐497‐020WR cable) to monitor pilot and main. Scannersautomatically switched at appropriate time. EDC2