All Burner Controls
For your Fireye component part needs search our site or call us Toll Free 800-752-3697
Fireye provides a variety of burner control flame safeguard and combustion controls. Our BurnerPRO™, BurnerLogix™, Flame-Monitor™ and MicroM families provide safe and reliable light off of packaged burners used on commercial and industrial boilers as well as direct fired makeup air units and commercial hot water heaters.
Burner Controls Subcategories
The Fireye BurnerLogixTM System is a microprocessor based burner management control system designed to provide the proper burner sequencing, ignition and flame monitoring protection onautomatically ignited oil, gas, and combination fuel burner […]
BurnerPRO Flame Safeguard The BurnerPRO™ provides the proper burner sequencing, ignition and continuous flame monitoring for commercial heating and process equipment firing oil and gas fuels. BurnerPRO Flame Safeguard (BP110UVF/BP230UVF) Contr […]
D-Series 70D40 and 70D41 Burner Control Fireye Series D10, D20 and D30 burner management controls provide ignition and main flame failure protection for automatically ignited oil and gas burners. Plug-in Amplifier Modules permit the selection […]
The Fireye® FLAME-MONITOR™ System is a microprocessor based burner management control system designed to provide the proper burner sequencing, ignition and flame monitoring pro-tection on automatically ignited oil, gas, and combination fuel bu […]
Fireye Flame Scanners provides a variety of UV and IR flame scanners that accurately detect the presence or absence of flame in a combustion chamber and some provide both self-check and non-self check capabilities.
The inTouch Wireless Monitoring System provides continuous monitoring for up to 10 Flame-Monitor, MicroM and/or BurnerLogix flame safeguard controls. The inTouch System provides 4 dry-contact andAC power inputs. In the event of a lockout or co […]
Fireye® Modular M-Series II Flame Safeguard Controls are compact, modular burner management systems. They are designed to provide automatic ignition and continuous flame monitoring for commercial sizes of heating and process burners that use g […]
Designed to provide automatic ignition and continuous flame monitoring, the M4RT1/M4RT24 is meant for commercial-sized heating and process burners that use gaseous fuels. The M4RT1/M4RT24 control incorporates a safety checking circuit that is […]
Burner Controls Components
Programmer. Selectable purge (30 sec min.), 5 and 10 sec. TFI, non‐recycle, early spark termination. M‐D circuit must be proven through the completion of MTFI. EP174
Programmer. Early spark termination. ED510 to select purge (30 sec min.), prove air flow, prove high fire, prove low fire, and post purge. Early spark termination. Infinite hold on M‐D circuit. EP177
Programmer. Selectable purge (30 sec min.), selectable TFI, recycle, French language.
Programmer. Selectable purge (30 sec min.), selectable TFI, recycle, Spanish language. EP200F
Programmer. Selectable purge (30 sec min.), 10 and 15 sec. TFI, recycle. EP260
Programmer. Selectable purge (30 sec min.), pilot stabilization, recycle, 10 and 10 sec TFI. EP265
Programmer. Selectable purge (30 sec min.), 5 and 10 sec. TFI, recycle, early spark termination.
Programmer. Selectable purge (30 sec min.), selectable recycle/non‐recycle, 5 and 10 sec TFI, no modulation, French language. EP300F
Programmer. Selectable purge (30 sec min.), selectable recycle/non‐recycle, 5 and 10 sec TFI, no modulation, Spanish language. EP300S
Programmer. Selectable purge (30 sec min), 5 and 10 sec TFI, selectable recycle/non‐recycle, no modulation. EP380
Programmer. Selectable purge (15 sec min), 5 and 10 sec TFI, selectable recycle/non‐recycle, no modulation.
Programmer. Selectable purge (0 sec min), 5 and 10 sec TFI, selectable recycle/non‐recycle, no modulation. EP382
Programmer. Selectable purge, selectable TFI, selectable recycle/non‐recycle via ED510, no modulation, no agency approvals. EP383