All THERMOCOUPLE & RTD TEMPERATURE TRANSMITTERS
Temperature transmitters make it possible to send a scaleable (4 to 20) mA signal from a temperature sensor to a control device without investing in long, expensive runs of thermocouple or RTD wire.
Pyromation carries programmable RTD and thermocouple temperature transmitters that can be mounted in the temperature sensor assembly connection head, or surface mounted using a DIN rail mounting clip. Some units offer a visual digital display that shows the current measured value. All are PC programmable and convert various signals into a scaleable (4 to 20) mA analog output signal. We also carry transmitters programmable with Hart® protocol for various signal inputs. Depending on type, some of Pyromation’s thermocouple and RTD temperature transmitters are UL recognized components and/or FM and CSA approved, including styles that are intrinsically safe and approved for use in hazardous locations.
Pyromation temperature transmitters are used in many demanding industries including Pharmaceuticals, Oil & Gas, Power Generation, Chemical, PetroChemical, and Food and Dairy.
The Series 642 programmable HART® field temperature transmitter is a two-wire transmitter with analog output. It has measurement input for resistance thermometers (RTDs) in 2, 3, or 4-wire connections, thermocouples, and voltage signals. The t […]
The Series 442 programmable HART® temperature transmitter is a two-wire transmitter with an analog output. It has measurement input for resistance thermometers (RTDs) in 2, 3, or 4-wire connections, thermocouples, and voltage signals. The tran […]
The Series 441 programmable RTD/thermocouple temperature transmitter is a two-wire transmitter with an analog output. It has measurement input for resistance thermometers (RTDs) in 2, 3 or 4 wire connections, thermocouples, and voltage signals […]
The Series 440 programmable RTD temperature transmitter is a two-wire transmitter with an analog output. It has measurement input for Pt100 resistance thermometers (RTDs) in 2 or 3 wire connections. Setting up of the transmitter is done using […]
The Series 450 Programmable Integral Temperature Transmitter is ideal for monitoring temperature in highly moist or corrosive environments and in small areas such as pipes and tanks. The unit consists of a 4-wire Pt100 RTD sensor, built-in (4 […]
The T82 programmable HART® field temperature transmitter is a 2-wire unit with analog output. It includes input for RTDs: resistance inputs in 2-wire, 3-wire, and 4-wire connections; thermocouples and voltage signals. The transmitter can be su […]
The Series 662 programmable dual input HART® field temperature transmitter is a 2-wire unit with analog output. It includes input for RTDs; resistance inputs in 2-wire, 3-wire, and 4-wire connections; thermocouples and voltage signals. The tra […]
All Pyromation RTD temperature and thermocouple transmitters are programmable using the TransComm Light downloadable software package. Once you install this software on your computer, the instructions will guide you through the signal programm […]