The Fireye MicroM Series Flame Safeguard Control is a compact, microprocessor based, modular burner management system designed to provide automatic ignition and continuous flame monitoring for commercial sizes of heating and process equipment that use gas and/or light oil fuels.
MICROM CHASSIS MEC320 CHASSIS FOR USE WITH MEP300 AND 600 SERIES PROGRAMMERS
MICROM CHASSIS TYPES FOR USE WITH MEP100, 200, AND 500 SERIES PROGRAMMERS
MICROM PROGRAMMER MODULES
The Fireye MEP100, MEP100P, MEP101, MEP102, MEP103, MEP104, MEP105, MEP106 MEP107,MEP108, ME109, MEP130, MEP141 and MEP149 Programmer Modules are used with the Fireye Modular MicroM control. The operational characteristics of the control are d […]
PROGRAMMERS AND FLAME AMPLIFIERS FOR USE WITH INTEGRATED FLAME SCANNERS
PROGRAMMERS FOR USE WITH MEC320 / MEC480 CHASSIS
The Fireye MEP300, MEP304, MEP335 and MEP397 Programmer Modules are used with the Fireye Modular MicroM control. The MEP300 series programmers provide additional enhancements such as early spark termination, pilot proving and interrupted or in […]
Fireye MEP397 Programmer, 15 sec purge, provides interrupted ignition, interrupted pilot, non recycle on flame fail
MEP397 Programmer, 15 sec purge, provides interrupted ignition, interrupted pilot, non recycle on flame fail.
Fireye MEP437 Programmer, Valve proof of closure, selectable purge, PTFI timing, intermittent or interrupted, recycle / non‐recycle operation
MEP437 Programmer, Valve proof of closure, selectable purge, PTFI timing, intermittent or interrupted, recycle / non‐recycle operation, reset by power interruption of manual reset.
Fireye MEP696 Programmer For use with MEC320TS chassis only.
MEP696 Programmer, provides selectable PTFI, selectable baud rate, and selectable recycle / non‐recycle operation. For use with MEC320TS chassis only.
Fireye MEP697 Programmer Selectable TFI timing, purge timing, post purge, prove open at start, and recycle / non‐recycle on flame fail
MEP697 Programmer Selectable TFI timing, purge timing, post purge, prove open at start, and recycle / non‐recycle on flame fail. Includes 5 sec pilot proving, early spark termination, 10 sec MTFI, and interrupted pilot.
Fireye MEUV1 UV amp, 0.8 sec FFRT. Use with UV1, UV2, 45UV3.
MEUV1 UV amp, 0.8 sec FFRT. Use with UV1, UV2, 45UV3.
Fireye MEUV4 UV amp, 3 sec FFRT. Use with UV1, UV2, 45UV3.
MEUV4 UV amp, 3 sec FFRT. Use with UV1, UV2, 45UV3.
Fireye MEUVS1 UV self check amp, 0.8 sec FFRT. Use with 45UV5‐1008, ‐1009.
MEUVS1 UV self check amp, 0.8 sec FFRT. Use with 45UV5‐1008, ‐1009.
Fireye MEUVS4 UV self check amp, 3 sec FFRT. Use with 45UV5‐1008, ‐1009.
MEUVS4 UV self check amp, 3 sec FFRT. Use with 45UV5‐1008, ‐1009.
Fireye MERT1 Flame rect amp. 0.8 sec FFRT. Use with 69ND, 45CM.
MEUV4 UV amp, 3 sec FFRT. Use with UV1, UV2, 45UV3.
Fireye MERT4 Flame rect amp. 3 sec FFRT. Use with 69ND, 45CM.
MERT4 Flame rect amp. 3 sec FFRT. Use with 69ND, 45CM.
Fireye MEIR1 Infrared amp, 0.8 sec FFRT. Use with 48PT2 scanner.
MEIR1 Infrared amp, 0.8 sec FFRT. Use with 48PT2 scanner.
Fireye MEIR4 Infrared amp, 3 sec FFRT. Use with 48PT2 scanner.
MEIR4 Infrared amp, 3 sec FFRT. Use with 48PT2 scanner.
Fireye MECD1 Cadmium sulfide amp, 0.8 sec FFRT. Use with C554A scanner.
MECD1 Cadmium sulfide amp, 0.8 sec FFRT. Use with C554A scanner.
Fireye MECD4 Cadmium sulfide amp, 3 sec FFRT. Use with C554A scanner.
MECD4 Cadmium sulfide amp, 3 sec FFRT. Use with C554A scanner.
Fireye MEP237 Programmer, Selectable recycle/non‐recycle function, TFI timing, purge timing, post purge, prove open at start
MEP237 Programmer, Selectable recycle/non‐recycle function, TFI timing, purge timing, post purge, prove open at start. Provides 0.30 second flame failure response time, for use with Phoenix and InSight flame scanner and MEDC2 amplifier.
