All Burner Controls
Fireye provides a variety of burner control flame safeguard and combustion controls. Our BurnerPRO™, BurnerLogix™, Flame-Monitor™ and MicroM families provide safe and reliable light off of packaged burners used on commercial and industrial boilers as well as direct fired makeup air units and commercial hot water heaters.
Burner Controls Subcategories
The Fireye BurnerLogixTM System is a microprocessor based burner management control system designed to provide the proper burner sequencing, ignition and flame monitoring protection onautomatically ignited oil, gas, and combination fuel burner […]
BurnerPRO Flame Safeguard The BurnerPRO™ provides the proper burner sequencing, ignition and continuous flame monitoring for commercial heating and process equipment firing oil and gas fuels. BurnerPRO Flame Safeguard (BP110UVF/BP230UVF) Contr […]
D-Series 70D40 and 70D41 Burner Control Fireye Series D10, D20 and D30 burner management controls provide ignition and main flame failure protection for automatically ignited oil and gas burners. Plug-in Amplifier Modules permit the selection […]
The Fireye® FLAME-MONITOR™ System is a microprocessor based burner management control system designed to provide the proper burner sequencing, ignition and flame monitoring pro-tection on automatically ignited oil, gas, and combination fuel bu […]
Fireye Flame Scanners provides a variety of UV and IR flame scanners that accurately detect the presence or absence of flame in a combustion chamber and some provide both self-check and non-self check capabilities.
The inTouch Wireless Monitoring System provides continuous monitoring for up to 10 Flame-Monitor, MicroM and/or BurnerLogix flame safeguard controls. The inTouch System provides 4 dry-contact andAC power inputs. In the event of a lockout or co […]
Fireye® Modular M-Series II Flame Safeguard Controls are compact, modular burner management systems. They are designed to provide automatic ignition and continuous flame monitoring for commercial sizes of heating and process burners that use g […]
Designed to provide automatic ignition and continuous flame monitoring, the M4RT1/M4RT24 is meant for commercial-sized heating and process burners that use gaseous fuels. The M4RT1/M4RT24 control incorporates a safety checking circuit that is […]
Burner Controls Components
MAUV3 UV amp, 3 sec FFRT. Use with UV1, UV2, 45UV3.
MART1 Flame rect amp. 2‐4 sec FFRT. Use with 69ND, 45CM
MART1T Flame rect amp. .8 sec FFRT. Use with 69ND, 45CM.
MART3 Flame rect amp. 3 sec FFRT. Use with 69ND, 45CM.
23-176 Replaceable fuse for M4RT1. Little fuse 225008, 2 AG, 8 amp, 125. Schedule A. under UV90L‐2
23-183 Replaceable fuse for MP100E programmer module. Littlefuse 22903.5, 3.5 amp, 250 V.
57AV7-1000 Tester, 120 VAC, for use with M‐Series, M‐Series II, MicroM
61-3060 Closed wiring base for surface mtg., use with M‐Series II and MicroM
61-5042 Open wiring base for cabinet mtg., use with M‐Series II and MicroM
M4RT1 Integrated flame rectification control, 120 VAC, 50 / 60 Hz, 5 sec purge, 10 sec PTFI, recycle operation. Can be used with UV90L‐2 UV scanner.
M4RT24‐xx Integrated flame rectification control, 120 VAC, 50/60 Hz, Purge time, PTFI timing determined by part number. Consult factory. Can be used with UV90L‐2 UV scanner
UV90L-2 UV scanner, Front and side (90o) lateral view, terminal block hook‐up. For use with M4RT1/M4RT24‐XX.
IT1000 Wireless monitoring system. Monitors up to 10 Flame‐Monitor and/or MicroM controls, 4 dry contact inputs, and 4 AC inputs Complete with 3 inch, 1/4 wave antenna.