All PLASTICS
These thermocouples are commonly used in the plastic process industry.
These RTDs are those most commonly used in the plastic process industry and the assemblies can be used in many general applications where a 1/8″ NPT fitting is preferred by utilizing either a compression fitting or a bayonet adapter. Create y […]
This RTD spring-adjustable immersion sensor has a bayonet cap on an 8″ spring (standard) to allow for immersion depths of 1/2″ to 7″. Create your model number by selecting the following: 1) To start off, please reference the product data sheet […]
The melt-bolt RTD sensor illustrated below is used on extruders and injection molding machines to directly measure the melt temperature of plastic as it moves down the extruder barrel. Create your model number by selecting the following: 1) To […]
The nozzle-melt temperature sensors listed below are typically placed into the nozzle of a plastic injection molding machine and sense the temperature of the molten plastic prior to being injected into the mold. Create your model number by sel […]
The threaded nozzle RTD illustrated below is generally used to measure the temperature of the nozzle of an injection molding machine. Create your model number by selecting the following: 1) To start off, please reference the product data sheet […]
This ring type assembly has the RTD element embedded into a brass ring. Various ring sizes are available to measure the surface temperature of nozzles, extruder barrels, die heads, molds, and many other applicable surfaces. Create your model n […]
The temperature sensors illustrated below are generally used for surface temperature measurement. Create your model number by selecting the following: 1) To start off, please reference the product data sheet on this page and configure your mod […]