Our Nexus® family of products is used in boiler applications to not only provide the flame safeguard function, but also control the entire burner operation in a manner which greatly improves efficiency and lowers operational costs. Optional variable speed motor control (VFD) and Oxygen trim provide power savings and reduced greenhouse gas.
ACCESSORIES FOR O2 PROBES FOR NX3100 / NX4000 / NX5100 / NX6100 / PPC5000 / PPC6000
ACCESSORIES FOR O2 PROBES FOR PPC4000 / NXF4000
ACCESSORIES FOR O2 PROBES FOR PPC4000 / NXF4000
AMPLIFIERS FOR NXF4000
The NXCESUV, NXCESIR, and NXCESDC plug-in amplifier cards provide the flame detection and monitoring capabilities to the NXF4000 control. Generally, the application and fuel type determine the type of amplifier card that should be installed. N […]
CABLES AND CONNECTORS FOR FX STYLE SERVO MOTORS
COMMUNICATION ACCESSORIES FOR NEXUS
COMMUNICATION SOFTWARE FOR NX3100 / NX5100 / NX6100 / PPC5000 / PPC6000
DISPLAY MODULE FOR PPC4000 / NXF4000
DISPLAY MODULES FOR NX6100 / PPC6000
EXPANSION INTERFACE CARDS FOR NX6100 / PPC6000
EXPANSION INTERFACE CARDS FOR PPC4000 / NXF4000
FX Style Servo Motors for PLC or General ModBus Use (19.2K BAUD)
FX Style Servo motors for PPC4000 / NXF4000
MAIN COMPONENTS for NEXUS Control System
MAIN COMPONENTS for NEXUS Control System utilizing FX style servo motors
MAIN COMPONENTS FOR NEXUS CONTROL SYSTEM UTILIZING CANbus SERVO MOTORS
MAIN COMPONENTS FOR NEXUS CONTROL SYSTEM UTILIZING CANbus SERVO MOTORS
O2 PROBES FOR NX6100 / PPC6000
Type2 Oxygen probe system for Nexus NX6100 and PPC6000
O2 PROBES FOR PPC4000 / NXF4000
The Fireye NXCES02 oxygen probe is designed to be used with the NXF/PPC4000 and provides continuous oxygen concentration readings allowing the NXF/PPC4000 to trim the air or fuel servo to obtain optimum combustion efficiency
PRESSURE SENSORS FOR PPC4000 / NXF4000 / NX6100 / PPC6000
SERVO MOTORS FOR NX6100 / PPC6000
STEAM AND GAS PRESSURE SENSORS FOR NX3100 / NX4100 / NX5100 / NX6100
STEAM AND GAS PRESSURE SENSORS FOR NX3100 / NX4100 / NX5100 / NX6100
STEAM PRESSURE SENSORS FOR NX3100 / NX4100 / NX5100 / NX6100 / PPC5000 / PPC6000
STEAM PRESSURE SENSORS FOR NX3100 / NX4100 / NX5100 / NX6100 / PPC5000 / PPC6000
TEMPERATURE SENSORS FOR NX3100 / NX4100 / NX5100 / NX6100
TEMPERATURE SENSORS FOR PPC4000 / NXF4000 / NX6100 / PPC6000
The BLPS, TS350 and TS752 Series of pressure and temperature sensors are designed for use with the PPC4000 Fuel Air Ratio Controller and BurnerLogix Burner Management System with Integrated Boiler Control.
TOUCH SCREENS FOR PPC4000 / NXF4000
TOUCH SCREENS FOR PPC4000 / NXF4000
VARIABLE SPEED DRIVES FOR USE WITH NEXUS / PPC4000 / PPC6000 / NXF4000 / NX6100
Variable speed drives in NEMA 12 cabinet, fused disconnect, motor overload relay, and backlit LCD display and keypad
Fireye NXA‐CAB20 Interconnecting cable from O2 probe to controller OBSOLETE
NXA‐CAB20 Interconnecting cable from O2 probe to controller, 66 feet (20 m.) Use with older style probes. OBSOLETE Consult ITS
Fireye NXA‐CAB30 Interconnecting cable from O2 probe to controller OBSOLETE
NXA‐CAB30 Interconnecting cable from O2 probe to controller, 99 feet (30 m.). Use with older style probes. OBSOLETE Consult ITS
Fireye NXA‐PWS Weather shield for O2 probe
NXA‐PWS Weather shield for O2 probe ‐ Use with older style probes.
Fireye NXA‐PS500 Angled gas sampling tube (500mm) for O2 probe
NXA‐PS500 Angled gas sampling tube (500mm) for O2 probe for flues 600mm to 2000mm.
Fireye NXA‐PS1000 Angled gas sampling tube (1000mm) for O2 probe
NXA‐PS1000 Angled gas sampling tube (1000mm) for O2 probe for flues 1200mm to 4000mm.
Fireye NXIATS CANbus ambient temperature sensor for NX6100 and PPC6000 probes
NXIATS CANbus ambient temperature sensor for NX6100 and PPC6000 probes.
Fireye NXCAP1 Calibration pump for O2 probe.
NXCAP1 Calibration pump for O2 probe.
Fireye 19‐117 Oxygen probe filter assembly
19‐117 Oxygen probe filter assembly
Fireye 29‐414 Oxygen probe flange gasket
29‐414 Oxygen probe flange gasket
Fireye 33‐510 Oxygen probe sealing nut
33‐510 Oxygen probe sealing nut. Use with older style probes.
Fireye 35‐335 Oxygen probe calibration nipple
35‐335 Oxygen probe calibration nipple. Use with older style probes.
Fireye 60‐2803 Oxygen probe calibration kit
60‐2803 Oxygen probe calibration kit, includes calibration pump, calibration nipple, 2 sealing nuts, 1 filter assembly, and 1 gasket. Use with older style probes.
Fireye NXAM ComFire 2 communications software (IBM PC) on CD
NXAM ComFire 2 communications software (IBM PC) on CD for Nexus / PPC5000 / PPC6000.
Fireye BLPS-15 Pressure transducer, 0‐15 psi
BLPS-15 Pressure transducer, 0‐15 psi (0‐1030 mb), 4‐20 mA output linear with pressure. ¼” NPT mounting. Screw terminal connections and conduit adapter cover.
Fireye BLPS-25 Pressure transducer, ‐14.7‐25 psi
BLPS-25 Pressure transducer, ‐14.7‐25 psi (‐1013‐1720 mb), 4‐20 mA output linear with pressure. ¼” NPT mounting. Screw terminal connections and conduit adapter cover. For use with PPC4000 / NXF4000 only.
