The 49 series flip-top aluminum connection heads listed below meet NEMA 4 requirements for indoor or outdoor applications.
Create your model number by selecting the following:
1) To start off, please reference the product data sheet on this page and configure your model / part number. If you need assistance, please call Industrial Thermal Systems and ask to speak with an Application Engineer.
2) Once you have a part number(s) configured, type it (them) into the text box and then press the “Add to Quote Cart” button to place them into your Quote Cart.
The miniature nickel-plated connection heads listed below are for indoor or outdoor non-hazardous locations. They provide some degree of protection from dust, rain, and splashing water.
Create your model number by selecting the following:
1) To start off, please reference the product data sheet on this page and configure your model / part number. If you need assistance, please call Industrial Thermal Systems and ask to speak with an Application Engineer.
2) Once you have a part number(s) configured, type it (them) into the text box and then press the “Add to Quote Cart” button to place them into your Quote Cart.
Unless otherwise specified, all thermocouple wire and extension wire is
supplied to meet either Standard or Special Limits of Error per ASTM/
ANSI E – 230
Create your model number by selecting the following:
1) To start off, please reference the product data sheet on this page and configure your model / part number. If you need assistance, please call Industrial Thermal Systems and ask to speak with an Application Engineer.
2) Once you have a part number(s) configured, type it (them) into the text box and then press the “Add to Quote Cart” button to place them into your Quote Cart.
Thermocouple wire and extension wire are usually solid conductors.
When greater flexibility is required, either are available in stranded
construction.
Create your model number by selecting the following:
1) To start off, please reference the product data sheet on this page and configure your model / part number. If you need assistance, please call Industrial Thermal Systems and ask to speak with an Application Engineer.
2) Once you have a part number(s) configured, type it (them) into the text box and then press the “Add to Quote Cart” button to place them into your Quote Cart.
Standard length spools are in 50 ft. increments. Non-standard lengths are available at an extra charge.
Create your model number by selecting the following:
1) To start off, please reference the product data sheet on this page and configure your model / part number. If you need assistance, please call Industrial Thermal Systems and ask to speak with an Application Engineer.
2) Once you have a part number(s) configured, type it (them) into the text box and then press the “Add to Quote Cart” button to place them into your Quote Cart.
STANDARD INSULATED THERMOCOUPLE EXTENSION WIRE
Create your model number by selecting the following:
1) To start off, please reference the product data sheet on this page and configure your model / part number. If you need assistance, please call Industrial Thermal Systems and ask to speak with an Application Engineer.
2) Once you have a part number(s) configured, type it (them) into the text box and then press the “Add to Quote Cart” button to place them into your Quote Cart.
Standard length spools are in 50 ft. increments. Non-standard lengths are available at an extra charge.
Create your model number by selecting the following:
1) To start off, please reference the product data sheet on this page and configure your model / part number. If you need assistance, please call Industrial Thermal Systems and ask to speak with an Application Engineer.
2) Once you have a part number(s) configured, type it (them) into the text box and then press the “Add to Quote Cart” button to place them into your Quote Cart.
Pyromation offers several special construction thermocouple wire and RTD cables for process applications.
Create your model number by selecting the following:
1) To start off, please reference the product data sheet on this page and configure your model / part number. If you need assistance, please call Industrial Thermal Systems and ask to speak with an Application Engineer.
2) Once you have a part number(s) configured, type it (them) into the text box and then press the “Add to Quote Cart” button to place them into your Quote Cart.
Cables made up of multi-pairs of thermocouple extension wire have gained wide acceptance as a cost effective means of running thermocouple
extension wire from the process area to central control locations.
Create your model number by selecting the following:
1) To start off, please reference the product data sheet on this page and configure your model / part number. If you need assistance, please call Industrial Thermal Systems and ask to speak with an Application Engineer.
2) Once you have a part number(s) configured, type it (them) into the text box and then press the “Add to Quote Cart” button to place them into your Quote Cart.
The thermocouple wire types are not stocked at the factory, but may be available on a special order basis. Minimum order quantities may apply.
Create your model number by selecting the following:
1) To start off, please reference the product data sheet on this page and configure your model / part number. If you need assistance, please call Industrial Thermal Systems and ask to speak with an Application Engineer.
2) Once you have a part number(s) configured, type it (them) into the text box and then press the “Add to Quote Cart” button to place them into your Quote Cart.
Create your model number by selecting the following:
1) To start off, please reference the product data sheet on this page and configure your model / part number. If you need assistance, please call Industrial Thermal Systems and ask to speak with an Application Engineer.
2) Once you have a part number(s) configured, type it (them) into the text box and then press the “Add to Quote Cart” button to place them into your Quote Cart.
Create your model number by selecting the following:
1) To start off, please reference the product data sheet on this page and configure your model / part number. If you need assistance, please call Industrial Thermal Systems and ask to speak with an Application Engineer.
2) Once you have a part number(s) configured, type it (them) into the text box and then press the “Add to Quote Cart” button to place them into your Quote Cart.
The Series 810 1/8 DIN Panel Indicator is loaded with standard and optional features that provide a flexible and economical solution for almost any application.
Create your model number by selecting the following:
1) To start off, please reference the product data sheet on this page and configure your model / part number. If you need assistance, please call Industrial Thermal Systems and ask to speak with an Application Engineer.
2) Once you have a part number(s) configured, type it (them) into the text box and then press the “Add to Quote Cart” button to place them into your Quote Cart.
The terminal blocks fit all Pyromation series 31, 34, 49, 63, 91 and 800 series connection heads.
Create your model number by selecting the following:
1) To start off, please reference the product data sheet on this page and configure your model / part number. If you need assistance, please call Industrial Thermal Systems and ask to speak with an Application Engineer.
2) Once you have a part number(s) configured, type it (them) into the text box and then press the “Add to Quote Cart” button to place them into your Quote Cart.
The hand pyrometer thermocouple probes are suitable for use in many process and laboratory applications for “spot checking” temperatures of a variety of products and air flows.
Create your model number by selecting the following:
1) To start off, please reference the product data sheet on this page and configure your model / part number. If you need assistance, please call Industrial Thermal Systems and ask to speak with an Application Engineer.
2) Once you have a part number(s) configured, type it (them) into the text box and then press the “Add to Quote Cart” button to place them into your Quote Cart.